Grand Distinction® Interior Paint

Pittsburgh Paints & Stains super premium Grand Distinction interior paint delivers a rich, long-lasting finish.



  • Paint & Primer in one for excellent hide and coverage
  • 100% acrylic cross-linking resin technology for high durability and excellent adhesion over multiple substrates
  • Exclusive RYB (Red, Yellow, Blue base) Base for fewer coats in the deepest hues
  • TiO2 levels that deliver clean whites
  • Excellent flow & leveling for a smooth finish
  • Excellent stain resistance
  • Excellent scrub resistance
  • Ultra-scrubbable flat and flat enamel
  • Burnish-resistant
  • Provides a mildew-resistant coating
  • Where to use
  • Interior walls and ceilings
  • High-traffic areas
  • Playrooms
  • Kitchens
  • Bathrooms
  • Living Rooms
  • Details

Area Preparation: Surface must be dry. Remove all loose, peeling paint, dirt, grease and any other surface contaminants. Putty all nail holes, and caulk all cracks and open seams. Sand all glossy, rough, and patched surfaces. Masonry and plaster surfaces must be allowed to cure for 30 days prior to painting. When Grand Distinction Paint & Primer in One is applied to an uncoated substrate, two coats are required, with the first coat acting as the primer. For stains, water marks, and challenging conditions use a premium problem solving primer.

Application: Stir thoroughly. Apply with a high quality brush, roller, paint pad, or by spray equipment (.015"-.019" spray tip.) When using more than one container of the same color, intermix to ensure color uniformity. Thinning is usually not required. If necessary, thin with up to 1/4 pint (118 mL) of water per U.S. gallon (3.78 Liters) of paint.

Application Temperature: Apply when air, product, and surface temperatures are between 50°F (10°C) and 90°F (32°C).

Drying Time: Normally dries to touch in one hour at 77°F (25°C) and 50% relative humidity. Allow four hours before recoating. Drying times listed may vary depending on temperature, humidity, color, film build, and air movement. Wait at least 14 days after painting before cleaning the surface with a non-abrasive, mild cleanser.

Cleanup: Clean tools with warm, soapy water.

  • Data Sheets
Product CodeFinishSizeMSDS
35-110FlatQuart, One Gallon, Five GallonMSDS
35-115FlatQuart, One Gallon, Five GallonMSDS
35-116FlatQuart, One GallonMSDS
35-117FlatQuart, One GallonMSDS
35-1210Ceramic Flat EnamelQuart, One Gallon, Five GallonMSDS
35-1215Ceramic Flat EnamelQuart, One Gallon, Five GallonMSDS
35-1216Ceramic Flat EnamelQuart, One Gallon, Five GallonMSDS
35-1217Ceramic Flat EnamelQuart, One Gallon, Five GallonMSDS
35-1218Ceramic Flat EnamelQuart, One Gallon, Five GallonMSDS
35-1310EggshellQuart, One Gallon, Five GallonMSDS
35-1315EggshellQuart, One Gallon, Five GallonMSDS
35-1316EggshellQuart, One GallonMSDS
35-1317EggshellQuart, One GallonMSDS
35-1318EggshellQuart, One GallonMSDS
35-210SatinQuart, One Gallon, Five GallonMSDS
35-215SatinQuart, One Gallon, Five GallonMSDS
35-216SatinQuart, One Gallon, Five GallonMSDS
35-217SatinQuart, One Gallon, Five GallonMSDS
35-218SatinQuart, One Gallon, Five GallonMSDS
35-310Semi-Gloss EnamelQuart, One Gallon, Five GallonMSDS
35-315Semi-Gloss EnamelQuart, One Gallon, Five GallonMSDS
35-316Semi-Gloss EnamelQuart, One GallonMSDS
35-317Semi-Gloss EnamelQuart, One GallonMSDS
35-318Semi-Gloss EnamelQuart, One GallonMSDS