Lucite® Interior Paint

Easy application and good performance at a great price.

  • Acrylic latex formula
  • Good hiding
  • Easy water clean up
  • Applies smoothly and evenly
  • 15 year warranty
  • Where to use
  • Interior walls, ceilings and trim
  • Properly prepared interior drywall
  • Aged plaster
  • Masonry
  • Primed metal and wood
  • Details

Area Preparation: Surface must be dry. Remove all loose and peeling paint, dirt, grease, and any other surface contaminants. Putty all nail holes, and caulk all cracks and open seams. Sand all glossy, rough, and patched surfaces. Masonry and plaster surfaces must be allowed to cure for 30 days prior to painting. Prime all bare walls, wood, drywall, plaster, masonry, metal and porous surfaces with the appropriate primer.

Application: Stir thoroughly. Apply with a high quality brush, roller, paint pad or by spray equipment. For airless spray application, the minimum recommended tip size is .015" and pressure range of 1500 – 2000 psi. When using more than one container of the same color, intermix to ensure color uniformity. Thinning is usually not required. If necessary, thin with up to 1/4 pint (118 mL) of water per U.S. gallon (3.78 Liters) of paint.

Application Temperature: Apply only when air, product, and surface temperatures are between 50°F (10°C) and 90°F (32°C).

Drying Time: Normally dries to touch in 30 minutes to 1 hour at 77°F (25°C) and 50% relative humidity.

Cleanup: Clean brushes and tools with warm, soapy water.

  • Data Sheets
Product CodeFinishSizeMSDS
69110AFlatOne Gallon, Five GallonMSDS
69115AFlatOne GallonMSDS
69116AFlatOne GallonMSDS
69117AFlatOne GallonMSDS
69210ASatinOne Gallon, Five GallonMSDS
69215ASatinOne GallonMSDS
69216ASatinOne GallonMSDS
69217ASatinOne GallonMSDS
69310ASemi-Gloss One Gallon, Five GallonMSDS
69315ASemi-Gloss One GallonMSDS
69316ASemi-Gloss One GallonMSDS
69317ASemi-Gloss One GallonMSDS